HP ProLiant DL288 HP ProLiant DL288 G6 Server Maintenance and Service Guide - Page 94
To install the PCIe riser card, Removal and replacement procedures,
View all HP ProLiant DL288 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
To install the PCIe riser card: 1. Align the three riser card locking-tab holes to the corresponding standoffs on the PCI cage, and then push the card rightwards. 2. Tighten the screw that secures the riser card to the PCI cage. Figure 61 Installing the Three PCIe x8 Riser Card Figure 62 Installing the Two PCIe x8 Riser Card 1. Align the four riser card locking-tab holes to the corresponding screw standoffs on the PCI cage. 2. Tighten the screws that secure the riser card to the PCI cage. Removal and replacement procedures 90
Removal and replacement procedures
90
To install the PCIe riser card:
1.
Align the three riser card locking-tab holes to the corresponding standoffs on the PCI cage, and
then push the card rightwards.
2.
Tighten the screw that secures the riser card to the PCI cage.
Figure 61
Installing the Three PCIe x8 Riser Card
Figure 62
Installing the Two PCIe x8 Riser Card
1.
Align the four riser card locking-tab holes to the corresponding screw standoffs on the PCI cage.
2.
Tighten the screws that secure the riser card to the PCI cage.