HP StorageWorks 2/32 HP StorageWorks SAN Switch 2/32 V4.2.X Installation Guide - Page 26
Installing the Switch in a Rack Using the SAN Switch Rack Mount Kit
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Installing the SAN Switch 2/32 3. Connect the power cables to the SAN Switch 2/32 power connectors and to a power outlet. Ensure the power cable is routed so that it is not exposed to stress. 4. Turn on the power to the switch (flip the AC switch to 1). The switch automatically runs a Power On Self-Test (POST). Caution: Do not connect the switch to the network until the IP address is correctly set. For instructions on how to set the IP address, see "Configuring SAN Switch 2/32 Network Addressing" on page 39. Installing the Switch in a Rack Using the SAN Switch Rack Mount Kit This section provides instructions for installing the switch in an HP System/e cabinet, or in an HP 10000 series cabinet using the HP StorageWorks SAN Switch Rack Mount Kit supplied with your switch. The Rack Mount Kit installation requires one technician to install a SAN Switch. The following items are required to install the switch in a cabinet: ■ SAN Switch 2/32 ■ Power cables ■ #2 Phillips screwdriver ■ 7/16-inch wrench or socket The SAN Switch Rack Mount Kit rails and rail mounting hardware listed in Table 4. 26 SAN Switch 2/32 Version 4.2.x Installation Guide