HP StorageWorks 2/32 HP StorageWorks SAN Switch 2/32 V4.2.X Installation Guide - Page 32
Then install two #10-32 x 1/2-inch Phillips pan-head screws with captive
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Installing the SAN Switch 2/32 b. Depending on the rack you are using, complete one of the following tasks: - For an HP 10000 series or comparable EIA cabinet, install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 adapter washers in the upper and lower hole locations of the right rail. Then install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 adapter washers in the upper and lower hole locations of the left rail. See Figure 7. Figure 7: Assembling the outer rails (HP 10000 series or comparable EIA cabinet) 32 SAN Switch 2/32 Version 4.2.x Installation Guide
Installing the SAN Switch 2/32
32
SAN Switch 2/32 Version 4.2.x Installation Guide
b.
Depending on the rack you are using, complete one of the following tasks:
—
For an HP 10000 series or comparable EIA cabinet, install two #10-32 x
1/2-inch Phillips pan-head screws with captive star lock washers and two
#10 adapter washers in the upper and lower hole locations of the right rail.
Then install two #10-32 x 1/2-inch Phillips pan-head screws with captive
star lock washers and two #10 adapter washers in the upper and lower
hole locations of the left rail. See
Figure 7
.
Figure 7:
Assembling the outer rails (HP 10000 series or comparable EIA cabinet)