HP StorageWorks 2/32 HP StorageWorks SAN Switch 2/32 V4.2.X Installation Guide - Page 55

LEDs on the Non-Port Side of the SAN Switch 2/32, One Port Readiness LED on right side

Get HP StorageWorks 2/32 - SAN Switch PDF manuals and user guides View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Managing the SAN Switch 2/32 Table 5: Front Panel LED Patterns During Normal Operation (Continued) LED Name and Location Port Status LED (continued) LED Location Color Display Alternating green and orange Port Speed LED Above No light each port, on right Steady green Hardware Status Port is bypassed. The port is transmitting or receiving at 1 Gbps. The port is transmitting or receiving at 2 Gbps. Recommended Action Reset the port from a management station or check configuration of the Fibre Channel loop. No action required. No action required. LEDs on the Non-Port Side of the SAN Switch 2/32 The non-port side of the switch contains the following LEDs, see Figure 18: ■ One Port Readiness LED on right side ■ One Power Supply LED next to the AC power switch on each power supply ■ One Fan Failure LED at the top of each fan assembly (inside the bezel) 1 2 3 SHR-2579A 1 Power supply LED 2 Fan failure LED 3 Port readiness LED Figure 18: LEDs on non-port side of SAN Switch 2/32 Table 6 describes the LEDs on the non-port side of the switch. SAN Switch 2/32 Version 4.2.x Installation Guide 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Managing the SAN Switch 2/32
55
SAN Switch 2/32 Version 4.2.x Installation Guide
LEDs on the Non-Port Side of the SAN Switch 2/32
The non-port side of the switch contains the following LEDs, see
Figure 18
:
■
One Port Readiness LED on right side
■
One Power Supply LED next to the AC power switch on each power supply
■
One Fan Failure LED at the top of each fan assembly (inside the bezel)
Figure 18:
LEDs on non-port side of SAN Switch 2/32
Table 6
describes the LEDs on the non-port side of the switch.
Port Status
LED
(continued)
Alternating
green and
orange
Port is bypassed.
Reset the port from
a management
station or check
configuration of
the Fibre Channel
loop.
Port Speed
LED
Above
each port,
on right
No light
The port is
transmitting or
receiving at 1
Gbps.
No action
required.
Steady
green
The port is
transmitting or
receiving at 2
Gbps.
No action
required.
Table 5:
Front Panel LED Patterns During Normal Operation (Continued)
LED Name
and
Location
LED
Location
Color
Display
Hardware
Status
Recommended
Action
1
Power supply LED
2
Fan failure LED
3
Port readiness LED
SHR-2579A
1
3
2