HP StorageWorks 2/32 HP StorageWorks SAN Switch 2/32 V4.2.X Installation Guide - Page 33
washers and two #10 alignment washers in the upper and lower hole, locations of the left rail. See
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Installing the SAN Switch 2/32 - For an HP System/e cabinet, install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 alignment washers in the upper and lower hole locations of the right rail. Then install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 alignment washers in the upper and lower hole locations of the left rail. See Figure 8. Figure 8: Assembling the outer rails (HP System/e cabinet) Caution: Do not use any screws other than the fourteen that are provided. Use of any longer screws can cause damage to internal components. SAN Switch 2/32 Version 4.2.x Installation Guide 33
Installing the SAN Switch 2/32
33
SAN Switch 2/32 Version 4.2.x Installation Guide
—
For an HP System/e cabinet, install two #10-32 x 1/2-inch Phillips
pan-head screws with captive star lock washers and two #10 alignment
washers in the upper and lower hole locations of the right rail. Then install
two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock
washers and two #10 alignment washers in the upper and lower hole
locations of the left rail. See
Figure 8
.
Figure 8:
Assembling the outer rails (HP System/e cabinet)
Caution:
Do not use any screws other than the fourteen that are provided. Use
of any longer screws can cause damage to internal components.