HP StorageWorks 2/32 HP StorageWorks SAN Switch 2/32 V4.2.X Installation Guide - Page 36
Insert the switch into the rack and install two #10-32 x 1/2-inch Phillips
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Installing the SAN Switch 2/32 Note: This step applies to both the HP 10000 series, System/e cabinet or comparable EIA cabinets. Figure 11: Installing the switch into a rack (HP 10000 series or comparable EIA cabinet) Insert the switch into the rack and install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers, one on each side. See Figure 11 and Figure 12. 36 SAN Switch 2/32 Version 4.2.x Installation Guide
Installing the SAN Switch 2/32
36
SAN Switch 2/32 Version 4.2.x Installation Guide
Note:
This step applies to both the HP 10000 series, System/e cabinet or comparable
EIA cabinets.
Figure 11:
Installing the switch into a rack (HP 10000 series or comparable EIA
cabinet)
Insert the switch into the rack and install two #10-32 x 1/2-inch Phillips
pan-head screws with captive star lock washers, one on each side. See
Figure 11
and
Figure 12
.