HP StorageWorks 2/32 HP StorageWorks SAN Switch 2/32 V4.2.X Installation Guide - Page 72
Dimensions, Power Supply Specifications, Table 8
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Technical Specifications Dimensions Table 8 lists SAN Switch 2/32 dimensions. Table 8: Physical Specifications Dimension Height Depth Width Weight (with both power supplies) Value 2.58 in (65.5 mm) 23.06 in (585.6 mm) 16.87 in (42.86 cm) 35.8 lb (16.2 kg) Power Supply Specifications Table 9 lists power supply specifications. The power supply is universal and capable of functioning worldwide without using voltage jumpers or switches. It meets IEC 61000-4-5 surge voltage requirements. The power supply has its own built-in fan for cooling, pushing the air towards the front of the switch. Table 9: Power Supply Specifications Specification Outlet Maximum output Maximum system power consumption Input voltage Input line frequency Harmonic distortion BTU rating at 80% efficiency Inrush current Input line protection Value Correctly wired and earth-grounded 300 watts, with internal fans operating 190-220 watts (with some variation depending on transceiver vendor) 100-240 VAC (nominal 80% efficiency) auto-ranging 47-63 Hz Active power factor correction per EN61000-3-2 220 watts / 0.8 x 3.412 Btu/hr/watts = 938 Btu/hr Maximum of 15 amps for periods longer than 300 microseconds, at 50 degrees Celsius, hot or cold start Fused in both hot and neutral lines, using independent fuses 72 SAN Switch 2/32 Version 4.2.x Installation Guide