HP StorageWorks 2/32 HP StorageWorks SAN Switch 2/32 V4.2.X Installation Guide - Page 52
Interpreting LED Activity, LEDs on the Port Side of the Switch
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Managing the SAN Switch 2/32 Interpreting LED Activity SAN Switch 2/32 status is determined through the LED activity on the switch. There are three possible LED states: no light, a steady light, and a flashing light. The lights may be any of the following colors: ■ Green ■ Orange (may be referred to as amber in related documentation) ■ Yellow (appears when both green and orange LED elements are lit) Note: Any errors related to LED activity are listed in the error log. For information about the error log, refer to the HP StorageWorks Fabric OS 4.2.x Procedures User Guide. LEDs on the Port Side of the Switch The port side of the switch contains the following LEDs; see Figure 17: ■ One Switch Power/Status LED on right side ■ One Port Status LED next to each Fibre Channel port (lower LED) ■ One Port Speed LED next to each Fibre Channel port (upper LED) Note: The port LEDs for the upper ports (ports 16-31) are to the left of the ports. The Port LEDs for the lower ports (ports 0-15) are to the right of the ports. . 1 2 3 1 Port status LEDs (lower LED) 2 Port speed LEDs (upper LED) 3 Status LED Figure 17: LEDs on port side of SAN Switch 2/32 SHR-2578A 52 SAN Switch 2/32 Version 4.2.x Installation Guide