HP StorageWorks 2/32 HP StorageWorks SAN Switch 2/32 V4.2.X Installation Guide - Page 56
Table 6, Non-Port Side LED Patterns During Normal Operation, Location, Color, Display, Hardware
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Managing the SAN Switch 2/32 Table 6: Non-Port Side LED Patterns During Normal Operation LED Name and Location Port Readiness LED LED Location On far right when viewing switch from non-port side Power Supply LED On each power supply (left corner) Color Display No light Steady green Steady yellow Slow-flashing yellow (on 1 second; off 1 second) No light Hardware Status Switch is off, or boot is not complete, or boot failed. Switch is on and all ports are ready for use. One or more ports are offline. One or both of the following are true: One or more environmental ranges are exceeded. Error log contains one or more port diagnostic error messages. Power supply is not providing power. Recommended Action Verify switch is on and has completed booting. No action required. Verify switch has completed booting and is not disabled. If light is still yellow, check error log and Port Status LEDs. 1. Check environmental conditions, error log, Port Status LEDs, transceivers, cables, and loopback plugs. 2. Correct error condition. 3. Clear error log. 4. Rerun diagnostics to verify fix. Verify power supply is on and seated, and power cord is connected to a functioning power source. 56 SAN Switch 2/32 Version 4.2.x Installation Guide