HP StorageWorks 2/32 HP StorageWorks SAN Switch 2/32 V4.2.X Installation Guide - Page 47
Verifying Operation, Healthy/OK
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Installing the SAN Switch 2/32 4. Connect the cables to the SFPs as appropriate to the fabric topology by positioning each cable so that the key (the ridge on one side of the cable connector) is aligned with the slot in the SFP. See Figure 16. Figure 16: Inserting a cable into an SFP SHR-2574A Note: The cable is keyed so that it can only be inserted correctly into the SFP. If the cable does not slide in easily, check the orientation. Verifying Operation After making the appropriate connections, as outlined in this chapter, follow these steps to verify that the switch is running properly. 1. Access your browser. 2. At the URL address window, enter http://your switch IP address. 3. If connected properly, the name of your switch appears in green at the prompt, indicating Healthy/OK. SAN Switch 2/32 Version 4.2.x Installation Guide 47