HP StorageWorks 2/32 HP StorageWorks SAN Switch 2/32 V4.2.X Installation Guide - Page 53

describes the LEDs on the port side of the switch., Table 5

Get HP StorageWorks 2/32 - SAN Switch PDF manuals and user guides View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Managing the SAN Switch 2/32 Table 5 describes the LEDs on the port side of the switch. Table 5: Front Panel LED Patterns During Normal Operation LED Name and Location Switch Power/ Status LED LED Location On far right when viewing switch from port side Color Display No light Steady green Flashing green Port Status LED Lower LED next to each port No light Steady green Hardware Status Switch is off, or boot is not complete, or boot failed. One or both of the following are true: ■ One or more environmental ranges are exceeded. ■ Error log contains one or more port diagnostic error messages. No signal detected. Port is online (connected to external device) but has no traffic. Recommended Action Verify switch is on and has completed booting. No action required. 1. Check environmental conditions, error log, Port Status LEDs, transceivers, cables, and loopback plugs. 2. Correct error condition. 3. Clear error log. 4. Rerun diagnostics to verify fix. Check transceiver and cable. No action required. SAN Switch 2/32 Version 4.2.x Installation Guide 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Managing the SAN Switch 2/32
53
SAN Switch 2/32 Version 4.2.x Installation Guide
Table 5
describes the LEDs on the port side of the switch.
Table 5:
Front Panel LED Patterns During Normal Operation
LED Name
and
Location
LED
Location
Color
Display
Hardware
Status
Recommended
Action
Switch
Power/
Status LED
On far
right
when
viewing
switch
from port
side
No light
Switch is off, or
boot is not
complete, or boot
failed.
Verify switch is on
and has
completed
booting.
Steady
green
No action
required.
Flashing
green
One or both of the
following are true:
■
One or more
environmental
ranges are
exceeded.
■
Error log
contains one
or more port
diagnostic
error
messages.
1.
Check
environmental
conditions,
error log, Port
Status LEDs,
transceivers,
cables, and
loopback
plugs.
2.
Correct error
condition.
3.
Clear error
log.
4.
Rerun
diagnostics to
verify fix.
Port Status
LED
Lower LED
next to
each port
No light
No signal
detected.
Check transceiver
and cable.
Steady
green
Port is online
(connected to
external device)
but has no traffic.
No action
required.