Kyocera ECOSYS FS-2020D FS-2020D/3920DN/4020DN Operation Guide (Advanced) - Page 10

Selecting the Right Paper This section describes the guidelines for selecting paper. Condition Avoid using paper that is bent at the edges, curled, dirty, torn, embossed, or contaminated with lint, clay, or paper shreds. Use of paper in these conditions can lead to illegible printing and paper jams, and can shorten the life of the machine. In particular, avoid using paper with a surface coating or other surface treatment. Paper should have as smooth and even a surface as possible. Composition Do not use paper that has been coated or surface-treated and contains plastic or carbon. The heat of fusing can cause such paper to give off harmful fumes. Bond paper should contain at least 80% pulp. Not more than 20% of the total paper content should consist of cotton or other fibers. Paper Sizes Cassettes and the MP Tray are available for the paper sizes shown below. The dimensional tolerances are ±0.7mm for the length and width. The angle at the corners must be 90° ±0.2°. MP Tray Envelope Monarch Envelope #10 Envelope DL Envelope #9 Envelope #6 Size 3-7/8 x 7-1/2 inches 4-1/8 x 9-1/2 inches 110 x 220 mm 3-7/8 x 8-7/8 inches 3-5/8 x 6-1/2 inches Cassette or MP Tray Legal Letter ISO A4 ISO A5 ISO A6 JIS B6 Hagaki Ofuku-Hagaki Youkei 2 Youkei 4 Custom 128 x 182 mm Envelope C5 100 x 148 mm ISO B5 148 x 200 mm JIS B5 114 x 162 mm Executive 105 x 235 mm Oficio II Folio Statement 16 kai Cassette: 140 x 210 mm to 216 x 356 mm MP Tray: 70 x 148 mm to 216 x 356 mm Size 8-1/2 x 14 inches 8-1/2 x 11 inches 210 x 297 mm 148 x 210 mm 105 x 148 mm (FS-2020D: MP Tray only) 162 x 229 mm 176 x 250 mm 182 x 257 mm 7-1/4 x 10-1/2 inches 8-1/2 x 13 inches 210 x 330 mm 5-1/2 x 8-1/2 inches 197 x 273 mm Smoothness The paper should have a smooth, uncoated surface. Paper with a rough or sandy surface can cause blank spaces in the printed output. Paper that is too smooth can cause multiple feeding and fogging problems. (Fogging is a gray background effect.) 1-4 Paper Handling