Kyocera KM-1820 Fax System (K) Operation Guide - Page 18

FAX System Parts 1-4 9 Memory Indicator This indicator is lit when documents are temporarily stored in memory before printing or fax. The indicator flashes during scanning and reception when documents are stored in memory. 10 Error Indicator This indicator is lit or flashes if an error occurs. 11 System Menu/Counter Key and Indicator Press this key to change the initial settings or check the counter. 12 Log Out Key and Indicator Press this key after completing a task using job accounting. 13 Numeric Keys Use the numeric keys to enter the fax number of another party or for other number input. Even with pulse dialing, you can press the key after the other party responds to send the next number as a tone signal. 14 Reset/Power Key Press this key to cancel the setting and return to the basic screen. Hold the key for more than 2 seconds to turn the FAX System into Auto Sleep. 15 Original Quality Key and Indicator Press this key to set the document image quality. 16 Original Size Key and Indicator Press this key to select the document size. 17 Exposure Key and Indicator Press this key to adjust the document exposure level. 18 Message Display Displays procedures and error messages. 19 Left Select Key Press this key to select the left item on the bottom of the message display. 20 Right Select Key Press this key to select the right item on the bottom of the message display. 21 Back Key Press this key to return to the previous, upper menu. 22 W Destination Key Press this key to move the cursor to the left on the message display or to enter a destination. 23 S Address Recall Key Press this key to move the cursor up on the message display or for Address Recall. OPERATION GUIDE