NEC e232 User Guide - Page 17
Changing the battery
View all NEC e232 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Changing the battery , Be sure to turn the phone off before replacing the battery pack. ☛ While pressing down the area (A) of the rear cover, especially the place indicated by the arrow ➀, slide the rear cover in the direction of arrow ➁ with your finger tip. Then, lift the cover up in the direction of arrow ➂ to remove it. ☛ With the caution of the label on the battery pack facing upwards, insert it into the cavity in the phone body in the direction of arrow ➃, making sure that the tabs on the battery pack fit properly into the notches in the phone. Then press the battery pack down in the direction of arrow ➄ to clip it into the phone. ☛ Make sure that the battery pack is securely attached to the phone and align the rear cover with the grooves on the phone so that there is a gap of about 3 mm at the end of the cover. Then, while pressing down as indicated by arrow ➅, slide the rear cover in the direction of arrow ➆ until you hear a click. Notches Tabs Rear cover (A) About 3 mm Check that there is no gap between the rear cover and the phone body. , Do not scratch the phone body or the rear cover with your finger nail, when removing the rear cover. , Do not press too firmly on the rear cover and the phone body. The use of excessive force could damage the rear cover and the phone body. 5