Panasonic AG-AC160A Operating Instructions Advanced - Page 80
Main warning displays
View all Panasonic AG-AC160A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Main warning displays The main warning displays appearing on the LCD monitor or viewfinder are as follows. If a warning display is not listed, carefully check the message displayed. A [ALL DATA WILL BE DELETED. (INCLUDING CLIP OF AVCHD) FORMAT THE CARD NOW? (SLOT1)] If you format the memory card, all the recorded data will be deleted. (Including AVCHD clips.) Do you format the memory card? (SLOT1) C [CANNOT BE USED DUE TO INCOMPATIBLE DATA.] Cannot be used because the standard for the data is different. [CANNOT DELETE.] Clip cannot be deleted. [CANNOT DELETE WITH THIS BUTTON] Clip cannot be deleted. [CANNOT PLAY.] No playback is possible. [CANNOT PLAY WITH THIS BUTTON] No playback is possible. [CANNOT RECORD PH MODE INTO THIS CARD. PLEASE CHANGE THE REC FORMAT.] This memory card cannot be recorded to in PH mode. Change the recording format. [CANNOT RECORD. THE NUMBER OF CLIPS HAS EXCEEDED THE MAXIMUM LIMIT.] The maximum number of clips has been reached and no further clips can be recorded. [CANNOT SET THE NUMBER OF INDEXES HAS EXCEEDED THE MAXIMUM LIMIT.] No further indexes can be set because the number of indexes will exceed the maximum limit. [CANNOT SET PRE-REC, CARD CAPACITY TOO LOW.] PRE-REC cannot be set because the remaining memory card capacity is low. [CARD DOOR OPENED.] The memory card door is open. [CARD ERROR. PLEASE REFORMAT.] Formatting has failed. This memory card needs to be reformatted. [CARD FULL.] The memory card is full. [CHECK CARD.] Please check the memory card. If a memory card that has been used before in another device or computer is used for the first time in this camera, [CHECK CARD.] is displayed, and all operations may be disabled. In such a case, perform the following: 1) Remove the memory card from the camera and insert it again. (Page 15) The camera recognizes the memory card and cancels the [CHECK CARD.] display. 2) If the [CHECK CARD.] display is not disappeared even after removing and inserting the memory card several times, check the contents of the memory card on a computer, and erase all the data. 3) Format the memory card with the camera. (Page 13) If the data on the memory card cannot be either read or erased on a computer, the memory card may be damaged. Use another memory card. [CONTROL DATA ERROR HAS BEEN DETECTED.] An error has been detected in the control information. D [DISCONNECT USB CABLE.] When turning off the power, disconnect the USB connection cable. I [INCOMPATIBLE CARD. PLEASE CHECK CARD.] Displayed when the writing speed of the memory card in use is slow and recording may not be performed. 80