Panasonic AG-AC160A Operating Instructions Advanced - Page 97
[META DATA] screen (AVCHD mode only), [OTHER FUNCTIONS] screen, SLOT1] [SLOT2] [NO]
View all Panasonic AG-AC160A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Menu [META DATA] screen (AVCHD mode only) Item Display mode Description of settings [CARD READ] Loads the metadata recorded on the memory card into the camera. (AVCHD [SLOT1] [SLOT2] [NO] mode only) ••[NO FILE] is displayed when there is no metadata recorded on the memory card. [RECORD] Sets whether to simultaneously record the metadata on a memory card as it is (AVCHD loaded into the camera. mode only) [ON]: Records simultaneously. [OFF]: Does not record simultaneously. [USER CLIP NAME] Sets [USER CLIP NAME] recording method. (AVCHD [TYPE1]: mode only) The user clip name is the same as the [CLIP NAME] if no metadata is uploaded or if no uploaded data exists. [TYPE2]: The user clip name is the same as the [CLIP NAME] if no combination of data and COUNT value is uploaded, or if no uploaded data exists. [META DATA PROP] Displays the metadata recorded in the unit. (AVCHD [YES] [NO] mode only) [CLIP Resets the COUNT value to 1. COUNTER RST] (AVCHD [YES] [NO] mode only) [META INIT SET] Initializes the metadata recorded in the unit. (AVCHD All settings, including the [ON]/[OFF] setting for [RECORD] are cleared. mode only) [YES] [NO] is the factory default mode. [OTHER FUNCTIONS] screen Item Display mode Description of settings [IR REMOTE] Sets the operations of the supplied remote control unit. [ON]: Accepts commands from the remote control. ••Note that if the same type of remote control is used near the unit, the unit may receive commands from the other remote control during shooting, for example, and suddenly operate in an unexpected manner. [OFF]: Does not accept commands from the remote control. [DV CONTROL] Specifies the control method when a backup device is connected to the terminal for backup recording. only) [OFF]: Backup device is not controlled. [EXT]: Backup device controlled using button. Note, however, that recording on the camera is not performed. [BOTH]: Backup recording performed by the unit and the backup device. [CHAIN]: When the recording nears the end, recording on the backup device which is on standby will automatically start. is the factory default mode. 97