Panasonic DMREZ485V Dvd Recorder - English/spanish - Page 13

Getting Started The types of transmission: ,  to select "Antenna" or "Cable", then OK Automatic Clock and Channel Settings Please select the wire connected to RF IN. Antenna Cable OK OK to start automatic channel/ clock
setting. OK Confirm the time, then - DST (Daylight Saving Time) shows the summertime setting. - Time Zone shows the time difference from Greenwich Mean Time (GMT). Set Clock Automatically Clock Setting completed successfully. 4/4/2008 11:15 AM DST----------- On Time Zone---- EST See "Notes" ( right) OK Tips If the unit displays "No channels were found.", turn off the unit and confirm the cable or antenna input is connected to the RF IN terminal. Restart the set up again ( below). If "Auto Clock Setting is incomplete." is displayed, press [OK] and set the clock manually ( right). If the clock is not correct, set the clock with "Adjust Time Zone" ( 58) or "Set Clock Manually" ( 58). You can delete channels you don't need after completing Auto Channel Setting ( 55). Restarting the Auto-Setup (after relocation, for example) 1. When the unit is on and stopped, press and hold [CH ] and [CH ] on the main unit at the same time for about 5 seconds. The unit turns off. 2. Press [ DVD/VHS POWER] to turn the unit on. (The signal source and channel captions revert to their default values. All scheduled recordings are cleared.) To cancel in the middle Press [RETURN]. Notes Conditions of the received channel may cause automatic channel/ clock setting to take extra time. Manual Clock Setting Perform steps 1-6 on page 12. ,  to select the item you want to change. Set Clock Manually Month Day Year Hour Minute 1 / 1 / 2000 SAT 12 : 00 AM DST Time Zone Off EST OK ,  to change the setting. - Repeat steps 7-8 to change other items. OK to confirm new date and time. - The clock starts. Notes The automatic clock setting can take a few minutes. The channel and clock settings apply to both DVD and VHS drives. Time Zone EST (Eastern Standard Time)  GMT 5 CST (Central Standard Time)  GMT 6 MST (Mountain Standard Time)  GMT 7 PST (Pacific Standard Time)  GMT 8 AST (Alaska Standard Time)  GMT 9 HST (Hawaii Standard Time)  GMT 10 For other areas: xx hr DST (Daylight Saving Time) If you select "On", the clock is advanced one hour beginning at 2 a.m. on the second Sunday in March and ending at 2 a.m. on the first Sunday in November. Set the DST period manually when it varies according to regions ( below). To set the DST period manually 1. Press [FUNCTIONS]. 2. Press [, ] to select "Other Functions" then press [OK]. 3. Press [, ] to select "Setup" then press [OK]. 4. Press [, ] to select "Setup" then press []. 5. Press [, ] to select "Clock Settings" then press [OK]. 6. Press [, ] to select "Set the time change dates for DST" then press [OK]. 7. Press to set the "Month", "Day", "Hour", and "Minute" then press [OK]. Setup Channel Setup Disc Video Audio Display TV Screen VHS Set the time change dates for DST Beginning Month Day Hour Minute 3 2nd SUN 2 : 00 AM End Month 11 Day Hour Minute 1st SUN 2 : 00 AM Restore Default OK Reinitializes the settings. 13 RQT9056