Philips MX5100VR User manual - Page 11
Connecting the System to a, TV that has, Audio and, Video In jacks, This connection will let you use - fm antenna
View all Philips MX5100VR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
MX5100VR.qxd 6/04/2004 3:37 PM Page 11 Hookups (cont'd) 11 Connecting the System to a TV that has Audio and Video In jacks This connection will let you use the features of both the VCR and the DVD Player. Antenna or Cable TV Signal ANTENNA 75Ω VIDEO IN RIGHT AUDIO IN LEFT AUDIO IN VIDEO IN RIGHT AUDIO IN LEFT AUDIO IN Back of TV (example only) yellow video cable red/white audio cables OUT IN ANTENNA 75Ω TV ANTENNA COMPONENT AM VIDEO R AUDIO L VIDEO OUT DVD/ VCR Y OUT VCR IN Pb/Cb S-VIDEO OUT P FM Pr/Cr (75Ω) DIGITAL AUDIO OUT COAXIAL I PROGRESSIVE 1 Connect the antenna or Cable TV signal to the System's TV ANTENNA IN jack. 2 Connect the red and white audio cables (supplied) to the red and white AUDIO (DVD/VCR OUT) jacks on the System and to the red and white AUDIO IN jacks on the TV. Match the cable colors to the jack colors. If the TV has a single AUDIO IN jack, use the white audio cable to connect the System's white AUDIO L (left) (DVD/VCR OUT) jack to the TV's AUDIO IN jack.You will not use the red cable. 3 Connect the yellow video cable (supplied) to the System's yellow VIDEO (DVD/VCR OUT) jack and to the VIDEO IN jack on the TV. The VIDEO IN jack on the TV is usually yellow and may be labelled CVBS, Composite, or Baseband video. 4 Set the P/I PROGRESSIVE switch on the rear of the System to I (Interlace). 5 You are ready to connect the AM and FM antennas and the Speakers. Go to pages 16-17 to connect these items. 6 When all connections are complete, connect the power cords of the TV and the System to a power outlet.Turn on the TV and set it to the Audio/Video In channel. To find the right Audio/Video In channel, turn on the System. Press DVD to put the System in DVD mode.With no Disc in the Player, a large DVD logo will appear on the TV screen when you get the TV on the correct Audio/Video In channel. Go to your lowest TV channel (01 or 02), then change channels down until you see the DVD logo. 7 If you have not turned on the System already, go to page 19 to complete the VCR's First-Time Setup. This process sets up the TV channels and the language for the VCR menu.