Pioneer AVIC-X920BT Owner's Manual - Page 146

Chapter 30 Using the external unit (EXT1, EXT2) The term "external unit" refers to future Pioneer devices that are not currently planned for, or to devices that allow control of basic functions although they are not fully controlled by the navigation system. Two external units can be controlled by this navigation system. When two external units are connected, the navigation system allocates them as external unit 1 or external unit 2. For details of the connection method, refer to Installation Manual. For details of the operation, refer to the external unit's operation manual. This section provides information on external unit operations with the navigation system that differ from those described in the external unit's operation manual. p Operation varies depending on the external unit connected. (In some cases, the external unit may not respond.) Reading the screen 2 1 3 4 1 Source icon Shows which source has been selected. 2 External unit indicator Displays the information that is sent by connected external units. 3 Current time 4 Auto/Manual mode indicator Shows the current mode. Starting procedure 1 Display the AV operation screen. = For details of the operations, refer to Displaying the AV operation screen on page 77. 2 Tap [EXT1] or [EXT2] on the left edge of the screen to select the external unit. 3 Use the touch panel keys on the screen to control the external unit. = For details, refer to Using the touch panel keys on the next page. 146 En