Pioneer AVIC-X920BT Owner's Manual - Page 165

Customizing preferences Chapter 31 Customizing preferences p Immediately verify whether the display changes to a rear view camera image when the shift lever is moved to REVERSE (R) from another position. p When the screen changes to full-screen rear view camera image during normal driving, switch to the opposite setting in "Polarity". 1 Display the "System Settings" screen. = For details, refer to Displaying the "System Settings" screen on page 161. 2 Touch [Back Camera]. The "Back Camera Settings" screen appears. 3 Touch [Camera] change the setting to "On". p You can only switch to "Rear View" if this setting is "On". 4 Touch [Battery] or [GND] next to "Polarity" to select the appropriate polarity setting. ! Battery: When the polarity of the connected lead is positive while the shift lever is in the REVERSE (R) position ! GND: When the polarity of the connected lead is negative while the shift lever is in the REVERSE (R) position Adjusting the response positions of the touch panel (touch panel calibration) If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response positions of the touch panel screen. p Do not use a sharp pointed tool such as a ballpoint pen or a mechanical pen, which could damage the screen. 1 Display the "System Settings" screen. = For details, refer to Displaying the "System Settings" screen on page 161. 2 Touch [Screen Calibration]. A message confirming whether to start the calibration appears. 3 Gently touch the center of + mark displayed on the screen. The target indicates the order. After you touch all marks, the adjusted position data is saved. p Do not turn off the engine while saving the adjusted position data. # Press the MODE button. Returns to the previous adjustment position. # Press and hold the MODE button. Cancels the adjustment. Setting the illumination color The illumination color can be selected from 10 different colors. Furthermore, the illumination color can be switched between these 10 colors in order. Selecting the color from the preset colors 1 Display the "System Settings" screen. = For details, refer to Displaying the "System Settings" screen on page 161. 2 Touch [Illumi Color]. The "Illumination Color" screen appears. 3 Touch the color you want. Available options: ! Colored keys: Selects the desired preset color ! Memory 1/Memory 2 : Colors registered in the memory En 165