Pioneer AVIC-X920BT Owner's Manual - Page 147

Using the external unit (EXT1, EXT2) Using the touch panel keys Chapter 30 Using the external unit (EXT1, EXT2) 1 2 3 6 5 1 Sends a 1 key to 6 key command The external unit can be operated by transmitting the operating commands set to 1 key through 6 key. p Operation varies depending on the external unit connected. (In some cases, some functions may not be used until you touch and hold the key.) 2 Sends a command [a], [b], [c], or [d] Touch to operate the external unit. p Operation varies depending on the external unit connected. (In some cases, some functions may not be used until you touch and hold the key.) 3 Switches between automatic and manual function You can turn automatic and manual function on or off. You can switch between Auto and Manual functions of the external unit connected. Initially, this function is set to Auto. p Operating commands set for Auto and Manual operations vary depending on the external unit connected. 4 Uses F1 through F4 to operate the external unit 4 The external unit can be operated by transmitting the operating commands set to F1 through F4. p The operating commands set to F1 through F4 vary depending on the external unit. p Some functions may not be used until you touch and hold the key. 5 Sends a band command Touch to send a band command to the external unit. p Operation varies depending on the external unit connected. (In some cases, the external unit may not respond.) 6 Recalls equalizer curves = For details, refer to Using the equalizer on page 172. En 147