Pioneer AVIC-X920BT Owner's Manual - Page 89

HD Radioä reception Chapter 16 HD Radioä reception 3 Touch [Start] to begin a search. BSM begins to flash. While "BSM" is flashing, the six strongest broadcast frequencies will be stored under the preset tuning keys "Preset 1" to "Preset 6" in order of their signal strength. When this is complete, "BSM" stops flashing. p To cancel the storage process, touch [Stop]. p Storing broadcast frequencies with BSM may replace broadcast frequencies you have already saved. Switching the seek mode You can select the method of seek tuning. 1 Touch on the "Digital Radio" screen. 2 Touch [Seek] to select the desired setting. ! All: Seeks stations from both analog and digital broadcasting. ! HD: Seeks from digital broadcasting only. p If you select "HD" on this setting while [Blending] is set to "Analog", the setting on [Blending] turns to "D/A Auto" automatically. AM: 1 - 2 p The FM "4" (AM "2") setting allows reception of only the strongest stations, while lower settings let you receive weaker stations. Switching the reception mode If a digital broadcast reception condition gets poor, the tuner automatically switches to the analog broadcast of the same frequency level in default. If you want to prevent a frequent automatic switching, switch this setting to [Analog]. 1 Touch on the "Digital Radio" screen. 2 Touch [Blending] to switch the reception mode. ! Analog: Receives analog broadcasting only. ! D/A Auto: Automatically switches to the analog broadcast of the same frequency level as the digital broadcast. p If you select "Analog" on this setting while [Seek] is set to "HD", the setting on [Seek] turns to "All" automatically. Tuning in strong signals Local seek tuning allows you to tune in only those radio stations with sufficiently strong signals for good reception. 1 Touch on the "Digital Radio" screen. 2 Touch [Local]. 3 Touch [On] to turn local seek tuning on. To turn local seek tuning off, touch [Off]. 4 Touch [cPrev] or [Nextd] to set the sensitivity. There are four levels of sensitivity for FM and two levels for AM: FM: 1 - 2 - 3 - 4 En 89