Pioneer AVIC-X920BT Owner's Manual - Page 19
Flow from startup to, termination, On first-time startup, Basic operation - ipod cable
UPC - 884938104241
View all Pioneer AVIC-X920BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Basic operation Chapter 02 Basic operation ! If data loss or corruption occurs on the storage device for any reason, it is usually not possible to recover the data. Pioneer accepts no liability for damages, costs or expenses arising from data loss or corruption. Connecting your iPod Using the USB interface cable for iPod enables you to connect your iPod to the navigation system. p A USB interface cable for iPod (CD-IU50V) (sold separately) is required for connection. 1 Pull out the USB storage device after checking that no data is being accessed. Flow from startup to termination 1 Start the engine to boot up the system. After a short pause, the splash screen comes on for a few seconds. p To protect the LCD screen from damage, be sure to touch the touch panel keys with your finger only and gently touch the screen. 2 Turn off the vehicle engine to terminate the system. The navigation system is also turned off. On first-time startup When you use the navigation system for the first time, select the language that you want to use. 1 Start the engine to boot up the system. After a short pause, the splash screen comes on for a few seconds. 2 Touch the language that you want to use on the screen. USB and mini-jack connector USB interface cable for iPod p For details about iPod compatibility with this navigation system, refer to the information on our website. p Connection via a USB hub is not possible. 2 Connect your iPod. 3 Touch the language that you want to use for the voice guidance. Disconnecting your iPod % Pull out the USB interface cable for iPod after checking that no data is being accessed. The navigation system will now restart. En 19