Pioneer AVIC-Z130BT Owner's Manual - Page 85

HD Radio™ reception Chapter 16 HD Radio™ reception 1 2 3 4 1 Stores the strongest broadcast frequencies 2 Switches the seek mode 3 Tunes in strong signals 4 Switches the reception mode = For details of each function, refer to sec- tions below with the relative titles. Storing the strongest broadcast frequencies BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under the preset tuning keys "Preset 1" to "Preset 6" and, once stored there, you can tune in to these frequencies with the touch of a key. 1 Touch on the "Tuner" screen. 2 Touch [BSM]. 3 Touch [Start] to begin a search. "BSM" begins to flash. While "BSM" is flashing, the six strongest broadcast frequencies will be stored under the preset tuning keys "Preset 1" to "Preset 6" in order of their signal strength. When this is complete, "BSM" stops flashing. p To cancel the storage process, touch [Stop]. p Storing broadcast frequencies with BSM may replace broadcast frequencies you have already saved. Switching the seek mode You can select the method of seek tuning. 1 Touch on the "Tuner" screen. 2 Touch [Seek] to select the desired setting. ! All: Seeks stations from both analog and digital broadcasting. ! HD: Seeks from digital broadcasting only. p If you select "HD" on this setting while [Blending] is set to "Analog", the setting on [Blending] turns to "D/A Auto" automatically. Tuning in strong signals Local seek tuning allows you to tune in only those radio stations with sufficiently strong signals for good reception. 1 Touch on the "Tuner" screen. 2 Touch [Local]. 3 Touch [On] to turn local seek tuning on. To turn local seek tuning off, touch [Off]. 4 Touch [cPrev] or [Nextd] to set the sensitivity. There are four levels of sensitivity for FM and two levels for AM: FM: 1 - 2 - 3 - 4 AM: 1 - 2 p The FM "4" (AM "2") setting allows reception of only the strongest stations, while lower settings let you receive weaker stations. Switching the reception mode If a digital broadcast reception condition gets poor, the tuner automatically switches to the analog broadcast of the same frequency level by default. If you want to prevent a frequent automatic switching, switch this setting to [Analog]. 1 Touch on the "Tuner" screen. En 85