Ricoh GR Digital User Guide - Page 134

Changing File Name Settings (SEQUENTIAL NO.) When you shoot a still image, it is stored on an SD Memory Card or in internal memory, with a consecutively numbered file name automatically assigned. When you are switching SD Memory Cards, you can set your camera to continue consecutive numbering from the previously loaded SD Memory Card. Possible Settings ON (Continue numbering) *Setting upon purchase File names will be automatically assigned to still images you take, in the format of "R" followed by 7 digits, from R0010001.jpg to R9999999.jpg. With this setting, even when one SD Memory Card is switched with another, consecutive file numbering from the previous card is continued. OFF (Do not continue numbering) Every time a new card is loaded, file numbering is assigned, from RIMG0001.jpg to RIMG9999.jpg. If numbering exceeds RIMG9999, further recording is not possible To make changes to file numbering, follow the steps below. 1. Display the setup menu. For detailed operation, see P.123. 2. Press the " button to select [SEQUENTIAL NO.] and press the $ button. 3. Press the !" buttons to select the desired setting. 4. Press the M/O or # button. 5. If you pressed the # button in step 4, press also the M/O button. This setting will be used until you change it. 132