Xerox 6015/NI User Guide - Page 157
Adjustments and Maintenance Procedures, Color Registration, Setting Automatic Color Registration,
View all Xerox 6015/NI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Maintenance Adjustments and Maintenance Procedures This section includes: Color Registration ...157 Adjusting Paper Type ...158 Adjusting the Bias Transfer Roller ...158 Adjusting the Fuser ...158 Refreshing the Bias Transfer Roller ...159 Adjusting the Altitude ...159 Color Registration The printer automatically adjusts the color registration when automatic adjustment is turned on. You can also adjust color registration manually any time the printer is idle. You must adjust the color registration any time the printer is moved. If you are having printing problems, adjust the color registration. Setting Automatic Color Registration 1. On the printer control panel, press the System button. 2. To select Admin Menu, press the arrow buttons, then press OK. 3. Select Maintenance, then press OK. 4. Select Auto Regi Adjust, then press OK. 5. Select On, then press OK. 6. To return to the Ready screen, press Return. Performing an Automatic Color Registration Adjustment Automatic color registration adjustment occurs every time a new toner cartridge is installed. You can run this adjustment at other times as needed. To perform an automatic color registration adjustment: 1. On the printer control panel, press the System button. 2. To select Admin Menu, press the arrow buttons, then press OK. 3. Select Maintenance, then press OK. 4. Select Adjust Color Regi, then press OK. 5. At Auto Adjust, press OK. 6. At the Are you sure? prompt, press the arrow buttons to select Yes. 7. To begin the calibration, press OK. WorkCentre 6015 Color Multifunction Printer 157 User Guide