Xerox 6015/NI User Guide - Page 159

Adjusting the Fuser, Refreshing the Bias Transfer Roller, Adjusting the Altitude, System, Admin Menu

Page 159 highlights

Maintenance Adjusting the Fuser Use Adjust Fuser for optimum print quality across a wide range of paper types. If the toner on a print is smearing or can be rubbed off the paper, increase the offset for the paper you are using. If the toner is blistered or mottled, decrease the offset for the paper you are using. To adjust the fuser: 1. On the printer control panel, press the System button. 2. To select Admin Menu, press the arrow buttons, then press OK. 3. Select Maintenance, then press OK. 4. Select Adjust Fuser, then press OK. 5. Press the arrow buttons to select the paper type for the adjustment, then press OK. 6. Press the arrow buttons to increase or decrease the amount of offset, then press OK. 7. Repeat this procedure for each paper type you need to adjust. 8. To return to the Ready screen, press Return. Refreshing the Bias Transfer Roller Use the BTR Refresh procedure to reduce paper curling and improve paper discharge. To refresh the bias transfer roller: 1. On the printer control panel, press the System button. 2. To select Admin Menu, press the arrow buttons, then press OK. 3. Select Maintenance, then press OK. 4. Select BTR Refresh, then press OK. 5. Select On, then press OK. 6. To return to the Ready screen, press Return. Adjusting the Altitude Use Adjust Altitude to adjust the altitude to match that of the location where the printer is installed. If the altitude setting is incorrect, it can cause print-quality problems. To adjust the altitude: 1. On the printer control panel, press the System button. 2. To select Admin Menu, press the arrow buttons, then press OK. 3. Select Maintenance, then press OK. 4. Select Adjust Altitude, then press OK. 5. Press the arrow buttons to select the altitude of the location of the printer, then press OK. 6. To return to the Ready screen, press Return. WorkCentre 6015 Color Multifunction Printer 159 User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214

Maintenance
WorkCentre 6015 Color Multifunction Printer
159
User Guide
Adjusting the Fuser
Use Adjust Fuser for optimum print quality across a wide range of paper types. If the toner on a print is
smearing or can be rubbed off the paper, increase the offset for the paper you are using. If the toner is
blistered or mottled, decrease the offset for the paper you are using.
To adjust the fuser:
1.
On the printer control panel, press the
System
button.
2.
To select
Admin Menu
, press the arrow buttons, then press
OK
.
3.
Select
Maintenance
, then press
OK
.
4.
Select
Adjust Fuser
, then press
OK
.
5.
Press the arrow buttons to select the paper type for the adjustment, then press
OK
.
6.
Press the arrow buttons to increase or decrease the amount of offset, then press
OK
.
7.
Repeat this procedure for each paper type you need to adjust.
8.
To return to the Ready screen, press
Return
.
Refreshing the Bias Transfer Roller
Use the BTR Refresh procedure to reduce paper curling and improve paper discharge.
To refresh the bias transfer roller:
1.
On the printer control panel, press the
System
button.
2.
To select
Admin Menu
, press the arrow buttons, then press
OK
.
3.
Select
Maintenance
, then press
OK
.
4.
Select
BTR Refresh
, then press
OK
.
5.
Select
On
, then press
OK
.
6.
To return to the Ready screen, press
Return
.
Adjusting the Altitude
Use Adjust Altitude to adjust the altitude to match that of the location where the printer is installed. If
the altitude setting is incorrect, it can cause print-quality problems.
To adjust the altitude:
1.
On the printer control panel, press the
System
button.
2.
To select
Admin Menu
, press the arrow buttons, then press
OK
.
3.
Select
Maintenance
, then press
OK
.
4.
Select
Adjust Altitude
, then press
OK
.
5.
Press the arrow buttons to select the altitude of the location of the printer, then press
OK
.
6.
To return to the Ready screen, press
Return
.