Xerox 6015/NI User Guide - Page 31

Features Item Line Type Dialing Type Interval Timer Number of Redial Redial Delay Junk Fax Filter Remote Receive Remote Rcv Tone Send Header Company Name Your Fax Number Fax Cover Page DRPD Pattern Prefix Dial Prefix Dial Num Discard Size ECM Extel Hook Threshold Modem Speed Fax Activity Fax Transmit Fax Broadcast Country Description Specifies the default line type: PSTN or PBX. Specifies the dialing type. Specifies the interval timer from 3-255 seconds. Specifies the number of attempts made to redial a fax number from 0-9. Specifies the interval between redial attempts from 1-15 minutes. When set to On, accepts incoming faxes only from numbers registered in the Address Book. When set to On, you can elect to receive a fax by pressing the remote receive code on the external telephone. Press the remote receive code after you pick up the telephone handset. Specifies the tone in two digits from 00-99, when Remote Receive is set to On. When set to On, each outgoing fax includes a header, including the company name, fax number, and the date and time the fax was sent. When set to Off, no header information is included in the outgoing faxes. Note: Many countries have fax regulations that require Send Headers in each outgoing fax. The regulations specify the information that must be included in the header. Specifies the sender name that is recorded in the sender report. Specifies your telephone number, which is printed at the top of each page sent from your printer. When set to On, automatically prints a fax cover page. When set to Off, does not print a fax cover page. Specifies a distinctive ring pattern for use with DRPD service. Your telephone company specifies the DRPD Patterns. Specifies if you want to add the prefix number when you send a fax. Specifies the prefix dial number, up to five digits. This number dials before any auto dial number is started. Specifies if the printer discards any excess data at the bottom of the page. If Error Correction Mode (ECM) is set to On, it attempts to correct errors in the fax transmission from problems, such as a noisy telephone line. The default setting is On. Specifies the threshold value for the external telephone. Specifies the fax modem speed. Turns Auto Print On or Off. Specifies the fax transmit mode. Specifies the fax broadcast mode. Specifies the country in which the fax is installed. WorkCentre 6015 Color Multifunction Printer 31 User Guide