Xerox 6015/NI User Guide - Page 185
Consumables, Adjusting the Altitude, Cleaning the LED, Lenses, Loading Paper
View all Xerox 6015/NI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Symptom Vertical blanks. Slanted printing. Troubleshooting Cause The printer is worn or damaged. Solution For assistance, go to the Xerox® Support website at www.xerox.com/office/WC6015support. The toner cartridges are not Xerox® Verify that the toner cartridges meet toner cartridges. specifications and replace if necessary. For details, see Consumables on page 160. The altitude setting is incorrect. Adjust the altitude setting of the printer. For details, see Adjusting the Altitude on page 159. Condensation inside the printer causes partial blanks or creased paper. Turn on the printer and leave it on for at least one hour to get rid of the condensation. For assistance, go to the Xerox® Support website at www.xerox.com/office/WC6015support. The lenses are being blocked. Clean the lenses in the inside of the printer. For details, see Cleaning the LED Lenses on page 152. The printer is worn or damaged. For assistance, go to the Xerox® Support website at www.xerox.com/office/WC6015support. The toner cartridges are not Xerox® Verify that the toner cartridges meet toner cartridges. specifications and replace if necessary. The paper guides in the trays are Reset the paper tray guides. For details, not set correctly. see Loading Paper on page 75. WorkCentre 6015 Color Multifunction Printer 185 User Guide