Xerox 6015/NI User Guide - Page 186

Color, Registration, Adjusting Paper Type, Adjusting the Bias Transfer Roller, Adjusting, the Fuser

Page 186 highlights

Troubleshooting Symptom Colors are blurry or there is white area around objects. Blotchy or mottled images. Cause Solution Color-to-color alignment is not correct. Perform an automatic color registration adjustment. For details, see Color Registration on page 157. The paper is too light or too thin. Compensate for the paper thickness. For details, see Adjusting Paper Type on page 158. The bias transfer voltage needs to Adjust the bias transfer roller. For details, be adjusted for the paper type. see Adjusting the Bias Transfer Roller on page 158. The fuser needs to be adjusted for Adjust the fuser. For details, see Adjusting the paper type. the Fuser on page 158. Paper curls or frequent jams in Bias transfer roller needs to be the rear cover. refreshed. Refresh the bias transfer roller. For details, see Refreshing the Bias Transfer Roller on page 159. 186 WorkCentre 6015 Color Multifunction Printer User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214

Troubleshooting
186
WorkCentre 6015 Color Multifunction Printer
User Guide
Symptom
Cause
Solution
Colors are blurry or there is
white area around objects.
Color-to-color alignment is not
correct.
Perform an automatic color registration
adjustment. For details, see
Color
Registration
on page 157.
Blotchy or mottled images.
The paper is too light or too thin.
Compensate for the paper thickness. For
details, see
Adjusting Paper Type
on page
158.
The bias transfer voltage needs to
be adjusted for the paper type.
Adjust the bias transfer roller. For details,
see
Adjusting the Bias Transfer Roller
on
page 158.
The fuser needs to be adjusted for
the paper type.
Adjust the fuser. For details, see
Adjusting
the Fuser
on page 158.
Paper curls or frequent jams in
the rear cover.
Bias transfer roller needs to be
refreshed.
Refresh the bias transfer roller. For
details, see
Refreshing the Bias Transfer
Roller
on page 159.