Yamaha 01C Owner's Manual - Page 213
Midi Control, Output, Midi Out Filter
View all Yamaha 01C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
5 MIDI Control When you connect your Electone with a second MIDI device (such as a synthesizer or computer), you can determine how the Electone controls that MIDI device, or how the Electone is controlled. 1 Press the [UTILITY] button in the panel to call up the Utility Display. 2 Press the [MIDI] button at the top right of the display to call up the MIDI Page. 1 2 3 3-1 3 -2 3 -3 1 OUTPUT For setting the channels over which MIDI information will be transmitted. Any channel from 1 through 16 can be assigned to each keyboard, the Upper keyboard, the Lower keyboard and the Pedalboard. The MIDI messages on each keyboard will be sent on the channels set here. You must set the transmit channel here to match the receive channel of the connected device. Pressing each OUTPUT button calls up the channel selection pop-up menu. After you select the desired channel, the pop-up menu automatically closes. 2 MIDI OUT FILTER Deletes unnecessary MIDI data and keeps it from being transmitted from the Electone. After Touch and Rhythm start/stop are automatically filtered on the ELS-01. In addition, Horizontal Touch and Second Expression are automatically filtered on the ELS-01C. Set the parameter for which you wish to disable transmission to ON. Connections 13 ELS-01/01C Owner's Manual 213