Yamaha 01C Owner's Manual - Page 39

1 Selecting from the Voice Condition display Choose a Voice on the panel, then press the same button on the panel again (or press the name of the selected Voice in the display). The Voice Condition display appears. Voice Condition Display for each Voice has four pages that can be switched by pressing [1] - [4] buttons at the top right of the display. Voice Condition [Page 1] 1 1 4 2 3 2 3 Voice Controls and Effects 2-1 2-2 3-1 3-2 4 5 6 7 2-1 2-2 3-2 4 5 6 8 In this display, you can adjust the basic Voice controls, including panning, touch tone and volume. The displays of the various Voice sections have slight differences in their functions. 1 PAN Determines the position of the Voice in the stereo image. Seven pan positions are available. 2 TOUCH TONE The Touch Tone function gives you expressive control over the volume and timbre of a Voice. All Voices are provided with this expressive function, making it possible to perfectly reproduce the subtle dynamic and tonal changes of actual instruments. Two types of keyboard touch affect this function: Initial Touch and After Touch. 2 -1 INITIAL touch Controls volume and timbre according to the velocity at which you play the keys. The harder you play the keys, the greater the volume and the brighter the timbre will become. Higher settings make the change wider. Minimum setting produces no effect. Range: 0 - 14 NOTE Initial Touch may not be effective on some organ Voices. 2 -2 AFTER touch Controls volume and timbre according to the pressure you apply to the keys after playing them. The harder you press down on the keys, the greater the volume and the brighter the timbre will become. Higher settings make the change wider. Minimum setting produces no effect. Range: 0 - 14 NOTE After Touch has no effect on percussive Voices (such as piano or vibraphone), percussion sounds, or some organ Voices. ELS-01/01C Owner's Manual 39