Yamaha 01C Owner's Manual - Page 55

To use the Break patterns: As you play the Electone along with the rhythm, occasionally press the [BREAK] button. SYNCHRO START START BREAK Moreover, you can start/stop the rhythm and switch the sections by using the Footswitch. See page 180 for details. Rhythm/Keyboard Percussion Changing the rhythm volume There are two ways to set the rhythm volume: using the VOLUME buttons on the panel and using the volume slider in the display. The volume buttons let you make coarse adjustments to the volume while the slider gives you fine control. 5 Using VOLUME buttons on the panel (coarse): Press one of the VOLUME buttons of the rhythm on the panel to set the desired level. The buttons have seven volume settings, from a minimum of 0, or no sound, to a maximum of full volume. SEQ. 1 RHYTHM SEQ. 2 MARCH WALTZ SWING& JAZZ POPS R & B VOLUME MAX 1 SEQ. 3 SEQ. 4 LATIN WORLD MUSIC BALLAD ROCK DANCE 2 MIN Using VOLUME slider in the display (fine): Pressing the same rhythm button on the panel again (or pressing the rhythm name of the selected rhythm in the display) calls up the Rhythm Condition Display. DATA CONTROL To set the volume, touch the PERCUSSION VOLUME slider in the display or use the Data Control Dial. The control range is from 0 (no sound) to 24 (full volume). NOTE Depending on the volume value (set by the slider), two adjacent VOLUME button lamps may be lit at the same time, indicating an intermediate position. ELS-01/01C Owner's Manual 55