Yamaha 01C Owner's Manual - Page 43
Selecting from the panel, Reverb
View all Yamaha 01C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
By selecting [PRESET] in the list, the original (factory) effect category for the selected Voice is automatically set. Selecting [THRU] bypasses the effect (no effect is added to 4 the selected Voice). Voice Controls and Effects 2 TYPE 1 (Page 3)/ TYPE 2 (Page 4) Determines the type of the effect. Pressing the TYPE button on the display calls up the effect type list, corresponding to the selected effect category. Select the desired effect type in the list, then press [CLOSE] on the upper right in the display to close the list. If you have selected the [PRESET] category, the effect type cannot be edited. After changing the effect type, the effect parameter below is automatically changed corresponding to the selected effect type. 3 Effect Parameters Effect parameters are displayed corresponding to the selected effect type. 2 Selecting from the panel The Reverb, Sustain and Rotary Speaker displays are called up by pressing the respective buttons on the panel. Reverb Reverb adds an echo-like effect to the sound, giving the impression of a performance in a large room or concert hall. You can adjust the reverb volume for each Voice sections, or adjust the reverb volume for rhythm and accompaniment separately. To adjust the reverb effect and call up the Reverb pages: Press one of the REVERB buttons, located to the left of the panel, to set the Reverb effect. The Reverb display appears. The Reverb display consists of four pages. REVERB MAX MIN ELS-01/01C Owner's Manual 43