Yamaha 01C Owner's Manual - Page 233

Problem Possible Cause and Solution Recording is stopped before the performance is finished. • The amount of recorded data on the media is close to the maximum limit. Either use another media or delete the data of unnecessary songs. • When you overwrite the song, the length of a subsequently recorded part cannot exceed the length of the previously recorded parts. Delete the previously recorded song, then record again (page 120). • The performance data is too large. The maximum limit for recording performance data is 1 MB. An error message appears while entering a folder name or song name. • The song/folder name is too long. The capacity is 50 letters. • The song/folder name may be an invalid name. Refer to page 106. • The path name is too long. The capacity of the path name is 234 letters. Reduce the layer or shorten the song/folder name to shorten the path. The rhythm does not start at the beginning of a The M.D.R. is designed so that the rhythm cannot be started at the very recording, or stops in the middle of the performance. beginning of a recording. If you wish to use the rhythm, start it after the time indicator appears in the display. The floppy disk cannot be formatted when you want to Recognizing an unformatted disk takes a few seconds after it is inserted. format an unformatted disk. Wait about 30 seconds, then try to format again. The notes of the recording are "stuck" and sound continuously. During playback, you may have removed the SmartMedia card or floppy disk. Whenever you wish to stop playback, always press the [J] (Stop) button before removing the media. Appendix 14 ELS-01/01C Owner's Manual 233