ZyXEL UAG4100 User Guide - Page 116
Detected Device
View all ZyXEL UAG4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Chapter 7 Monitor The following table describes the labels in this screen. Table 40 Monitor > Wireless > Station List LABEL SSID Name DESCRIPTION This field displays the SSID name with which at least one station is associated. # MAC Address Associated AP SSID Name Security Mode Signal Strength Channel Band IP Address Tx Rate Rx Rate Tx Rx Association Time Refresh Click + or - to display or hide details about wireless stations that connected to the SSID. This is the station's index number in this list. This is the station's MAC address. This indicates the AP through which the station is connected to the network. This indicates the name of the wireless network to which the station is connected. A single AP can have multiple SSIDs or networks. This indicates which secure encryption methods is being used by the station to connect to the network. This indicates the strength of the signal. The signal strength mainly depends on the antenna output power and the distance between the station and the AP. This indicates the number the channel used by the station to connect to the network. This indicates the frequency band which is currently being used by the station. This is the station's IP address. An 169.x.x.x IP address is a private IP address that means the station didn't get the IP address from a DHCP server. This indicates the current data transmission rate of the station. This indicates the current data receiving rate of the station. This field displays the number of packets transmitted from the station. This field displays the number of packets received by the station. This displays the time a wireless station first associated with the AP. Click this to refresh the items displayed on this page. 7.16 Detected Device Use this screen to view information about wireless devices detected by the AP. Click Monitor > Wireless > Detected Device to access this screen. Note: At least one radio of the APs connected to the UAG must be set to monitor mode (in the Configuration > Wireless > AP Management screen) in order to detect other wireless devices in its vicinity. UAG Series User's Guide 116