ZyXEL UAG4100 User Guide - Page 149

Chapter 9 Wireless Figure 105 Configuration > Wireless > DCS Each field is described in the following table. Table 62 Configuration > Wireless > DCS LABEL General Settings Select Now Enable Dynamic Channel Selection DCS Time Interval Enable DCS Client Aware DESCRIPTION Click this to have the managed APs scan for and select an available channel immediately. Select this to turn on dynamic channel selection for the APs that the UAG manages. Enter a number of minutes. This regulates how often the UAG surveys the other APs within its broadcast radius. If the channel on which it is currently broadcasting suddenly comes into use by another AP, the UAG will then dynamically select the next available clean channel or a channel with lower interference. Select this to have the AP wait until all connected clients have disconnected before switching channels. 2.4 GHz Settings 2.4 GHz Channel Selection Method If you disable this then the AP switches channels immediately regardless of any client connections. In this instance, clients that are connected to the AP when it switches channels are dropped. Select auto to have the AP search for available channels automatically in the 2.4 GHz band. The available channels vary depending on what you select in the 2.4 GHz Channel Deployment field. Select manual and specify the channels the AP uses in the 2.4 GHz band. UAG Series User's Guide 149