ZyXEL UAG4100 User Guide - Page 237

Chapter 17 SMTP Redirect Figure 154 Configuration > Network > SMTP Redirect The following table describes the labels in this screen. Table 103 Configuration > Network > SMTP Redirect LABEL Enable SMTP Redirect Add Edit Remove Activate Inactivate Move DESCRIPTION Select this option to turn on the SMTP redirect feature on the UAG. Click this to create a new entry. Double-click an entry or select it and click Edit to open a screen where you can modify the entry's settings. To remove an entry, select it and click Remove. The UAG confirms you want to remove it before doing so. To turn on an entry, select it and click Activate. To turn off an entry, select it and click Inactivate. To change a rule's position in the numbered list, select the rule and click Move to display a field to type a number for where you want to put that rule and press [ENTER] to move the rule to the number that you typed. # Status User/Group Interface Source Address SMTP Server Apply Reset The ordering of your rules is important as they are applied in order of their numbering. This field is a sequential value, and it is not associated with a specific entry. This icon is lit when the entry is active and dimmed when the entry is inactive. This is the user account or user group name to whose SMTP traffic this rule is applied. This is the name of the interface on which the SMTP traffic must be received. This is the name of the source IP address object from which the SMTP traffic should be sent. If any displays, the rule is effective for every source. This is the IP address or Fully-Qualified Domain Name (FQDN) of the SMTP server to which the matched SMTP traffic is forwarded. Click Apply to save your changes back to the UAG. Click Reset to return the screen to its last-saved settings. 17.2.1 The SMTP Redirect Edit Screen Click Network > SMTP Redirect to open the SMTP Redirect screen. Then click the Add or Edit icon to open the SMTP Redirect Edit screen where you can configure the rule. UAG Series User's Guide 237