ZyXEL UAG4100 User Guide - Page 186
Table 79, Label, Description
View all ZyXEL UAG4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
Chapter 10 Interfaces Each field is described in the table below. Table 79 Configuration > Network > Interface > Bridge > Edit LABEL Show Advanced Settings / Hide Advanced Settings General Settings Enable Interface Interface Properties Interface Type DESCRIPTION Click this button to display a greater or lesser number of configuration fields. Select this to enable this interface. Clear this to disable this interface. Select one of the following option depending on the type of network to which the UAG is connected or if you want to additionally manually configure some related settings. internal is for connecting to a local network. Other corresponding configuration options: DHCP server and DHCP relay. The UAG automatically adds default SNAT settings for traffic flowing from this interface to an external interface. external is for connecting to an external network (like the Internet). The UAG automatically adds this interface to the default WAN trunk. Interface Name Zone Description Member Configuration Available For general, the rest of the screen's options do not automatically adjust and you must manually configure a policy route to add routing and SNAT settings for the interface. This field is read-only if you are editing the interface. Enter the name of the bridge interface. The format is brx, where x is 0 - 11. For example, br0, br3, and so on. Select the zone to which the interface is to belong. You use zones to apply security settings such as security policy control, and remote management. Enter a description of this interface. It is not used elsewhere. You can use alphanumeric and characters, and it can be up to 60 characters long. This field displays Ethernet interfaces and VLAN interfaces that can become part of the bridge interface. An interface is not available in the following situations: Member IP Address Assignment Get Automatically Use Fixed IP Address IP Address • There is a virtual interface on top of it • It is already used in a different bridge interface Select one, and click the >> arrow to add it to the bridge interface. Each bridge interface can only have one VLAN interface. This field displays the interfaces that are part of the bridge interface. Select one, and click the