ZyXEL UAG4100 User Guide - Page 243
Using UPnP in Windows XP Example
View all ZyXEL UAG4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 243 highlights
Chapter 19 UPnP The following table describes the fields in this screen. Table 106 Configuration > Network > UPnP LABEL Enable UPnP Enable NAT-PMP Allow UPnP or NAT-PMP to pass through Firewall Outgoing WAN Interface Support LAN List DESCRIPTION Select this check box to activate UPnP on the UAG. Be aware that anyone could use a UPnP application to open the web configurator's login screen without entering the UAG's IP address (although you must still enter the password to access the web configurator). Select this check box to activate NAT-PMP on the UAG. Be aware that anyone could use a NAT-PMP application to open the web configurator's login screen without entering the UAG's IP address (although you must still enter the password to access the web configurator). Select this check box to allow traffic from UPnP-enabled or NAT-PMP-enabled applications to bypass the security policies. Clear this check box to have the security policies block all UPnP or NAT-PMP application packets (for example, MSN packets). Select through which WAN interface(s) you want to send out traffic from UPnP-enabled or NAT-PMP-enabled applications. If the WAN interface you select loses its connection, the UAG attempts to use the other WAN interface. If the other WAN interface also does not work, the UAG drops outgoing packets from UPnP-enabled or NAT-PMP-enabled applications. The Available list displays the name(s) of the internal interface(s) on which the UAG supports UPnP and/or NAT-PMP. Apply Reset To enable UPnP and/or NAT-PMP on an interface, you can double-click a single entry to move it or use the [Shift] or [Ctrl] key to select multiple entriess and click the right arrow button to add to the Member list. To remove an interface, select the name(s) in the Member list and click the left arrow button. Click Apply to save your changes back to the UAG. Click Reset to return the screen to its last-saved settings. 19.4 Technical Reference The sections show examples of using UPnP. 19.4.1 Using UPnP in Windows XP Example This section shows you how to use the UPnP feature in Windows XP. You must already have UPnP installed in Windows XP and UPnP activated on the UAG. Make sure the computer is connected to a LAN port of the UAG. Turn on your computer and the UAG. 19.4.1.1 Auto-discover Your UPnP-enabled Network Device 1 Click start and Control Panel. Double-click Network Connections. An icon displays under Internet Gateway. 2 Right-click the icon and select Properties. UAG Series User's Guide 243