ZyXEL UAG4100 User Guide - Page 492

Chapter 46 System To get the UAG date and time from a time server 1 Click System > Date/Time. 2 Select Get from Time Server under Time and Date Setup. 3 Under Time Zone Setup, select your Time Zone from the list. 4 As an option you can select the Enable Daylight Saving check box to adjust the UAG clock for daylight savings. 5 Under Time and Date Setup, enter a Time Server Address (Table 233 on page 491). 6 Click Apply. 46.5 Console Port Speed This section shows you how to set the console port speed when you connect to the UAG via the console port using a terminal emulation program. See Table 2 on page 22 for default console port settings. Click Configuration > System > Console Speed to open the Console Speed screen. Figure 331 Configuration > System > Console Speed The following table describes the labels in this screen. Table 234 Configuration > System > Console Speed LABEL Console Port Speed DESCRIPTION Use the drop-down list box to change the speed of the console port. Your UAG supports 9600, 19200, 38400, 57600, and 115200 bps (default) for the console port. Apply Reset The Console Port Speed applies to a console port connection using terminal emulation software and NOT the Console in the UAG Web Configurator Status screen. Click Apply to save your changes back to the UAG. Click Reset to return the screen to its last-saved settings. UAG Series User's Guide 492