ZyXEL UAG4100 User Guide - Page 529

Chapter 46 System Figure 370 Configuration > System > Auth. Server The following table describes the labels in this screen. Table 249 Configuration > System > Auth. Server LABEL DESCRIPTION Enable Authentication Server Select the check box to have the UAG act as a RADIUS server. Authentication Server Certificate Select the certificate whose corresponding private key is to be used to identify the UAG to the RADIUS client. You must have certificates already configured in the My Certificates screen. Authentication Method Select an authentication method if you have created any in the Configuration > Object > Auth. Method screen. Trusted Client Use this section to configure trusted clients in the UAG RADIUS server database. Add Click this to create a new entry. Select an entry and click Add to create a new entry after the selected entry. Edit Double-click an entry or select it and click Edit to be able to modify the entry's settings. Remove To remove an entry, select it and click Remove. The UAG confirms you want to remove it before doing so. Note that subsequent entries move up by one when you take this action. Activate To turn on an entry, select it and click Activate. Inactivate To turn off an entry, select it and click Inactivate. # This is the index number of the entry. Status This icon is lit when the entry is active and dimmed when the entry is inactive. Profile Name This field indicates the name assigned to the profile. IP Address This is the IP address of the RADIUS client that is allowed to exchange messages with the UAG. Mask This is the subnet mask of the RADIUS client. Description This is the description of the RADIUS client. Apply Click Apply to save your changes back to the UAG. Reset Click Reset to return the screen to its last-saved settings. UAG Series User's Guide 529