ZyXEL UAG4100 User Guide - Page 137

Chapter 9 Wireless 9.2 Controller Screen Use this screen to set how the UAG allows new APs to connect to the network. Click Configuration > Wireless > Controller to access this screen. Figure 94 Configuration > Wireless > Controller Each field is described in the following table. Table 53 Configuration > Wireless > Controller LABEL DESCRIPTION Registration Type Select Manual to add each AP to the UAG for management, or Always Accept to automatically add APs to the UAG for management. Note: Select the Manual option for managing a specific set of APs. This is recommended as the registration mechanism cannot automatically differentiate between friendly and rogue APs. For details on how to handle rogue APs, see Section 7.16 on page 116. Apply Reset APs must be connected to the UAG by a wired connection or network. Click Apply to save your changes back to the UAG. Click Reset to return the screen to its last-saved settings. 9.3 AP Management Screen Use this screen to manage all of the APs connected to the UAG. Click Configuration > Wireless > AP Management to access this screen. Figure 95 Configuration > Wireless > AP Management UAG Series User's Guide 137