ZyXEL UAG4100 User Guide - Page 540
Table 257, Label, Description
View all ZyXEL UAG4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 540 highlights
Chapter 47 Log and Report The following table describes the labels in this screen. Table 257 Configuration > Log & Report > Log Settings > Edit (System Log) LABEL E-Mail Server 1/2 Active Mail Server Mail Server Port TLS Security Authenticate Server Mail Subject Send From Send Log To Send Alerts To Sending Log Day for Sending Log Time for Sending Log SMTP Authentication User Name Password Retype to Confirm Active Log and Alert System Log DESCRIPTION Select this to send log messages and alerts according to the information in this section. You specify what kinds of log messages are included in log information and what kinds of log messages are included in alerts in the Active Log and Alert section. Type the name or IP address of the outgoing SMTP server. Enter the same port number here as is on the mail server for mail traffic. Select this option to use Transport Layer Security (TLS) if you want encrypted communications between the mail server and the UAG. If you choose TLS Security, you may also select this to have the UAG authenticate the mail server in the TLS handshake. Type the subject line for the outgoing e-mail. Type the e-mail address from which the outgoing e-mail is delivered. This address is used in replies. Type the e-mail address to which the outgoing e-mail is delivered. Type the e-mail address to which alerts are delivered. Select how often log information is e-mailed. Choices are: When Full, Hourly and When Full, Daily and When Full, and Weekly and When Full. This field is available if the log is e-mailed weekly. Select the day of the week the log is e-mailed. This field is available if the log is e-mailed weekly or daily. Select the time of day (hours and minutes) when the log is e-mailed. Use 24-hour notation. Select this check box if it is necessary to provide a user name and password to the SMTP server. This box is effective when you select the SMTP Authentication check box. Type the user name to provide to the SMTP server when the log is e-mailed. This box is effective when you select the SMTP Authentication check box. Type the password to provide to the SMTP server when the log is e-mailed. Retype your new password for confirmation. Use the System Log drop-down list to change the log settings for all of the log categories. disable all logs (red X) - do not log any information for any category for the system log or e-mail any logs to e-mail server 1 or 2. enable normal logs (green check mark) - create log messages and alerts for all categories for the system log. If e-mail server 1 or 2 also has normal logs enabled, the UAG will e-mail logs to them. enable normal logs and debug logs (yellow check mark) - create log messages, alerts, and debugging information for all categories. The UAG does not e-mail debugging information, even if this setting is selected. UAG Series User's Guide 540