ZyXEL UAG4100 User Guide - Page 138
Table 54, LABEL, DESCRIPTION, Configuration > Wireless > Controller, Registration, Always
View all ZyXEL UAG4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Chapter 9 Wireless Each field is described in the following table. Table 54 Configuration > Wireless > AP Management LABEL DESCRIPTION Edit Select an AP and click this button to edit its properties. Remove Select one or multiple APs and click this button to remove the AP(s) from the list. Reboot LED On LED Off # IP Address MAC Address Model R1 Mode / Profile R2 Mode / Profile Mgnt. VLAN ID(AC) Mgnt. VLAN ID(AP) Description Note: If in the Configuration > Wireless > Controller screen you set the Registration Type to Always Accept, then as soon as you remove an AP from this list it reconnects. Select one or multiple APs and click this button to force the AP(s) to restart. Select an AP and click this button to disable the AP's LED suppression mode. The AP LEDs stay lit after the AP is ready. This button is not available if the selected AP doesn't support suppression mode. Select an AP and click this button to enable the AP's LED suppression mode. All the LEDs of the AP will turn off after the AP is ready. This button is not available if the selected AP doesn't support suppression mode. This field is a sequential value, and it is not associated with any entry. This field displays the IP address of the AP. This field displays the MAC address of the AP. This field displays the AP's hardware model information. It displays N/A (not applicable) only when the AP disconnects from the UAG and the information is unavailable as a result. This field displays the operating mode (AP) and AP profile name for Radio 1. It displays n/a for the profile for a radio not using an AP profile. This field displays the operating mode (AP) and AP profile name for Radio 2. It displays n/a for the profile for a radio not using an AP profile. This displays the Access Controller (the UAG) management VLAN ID setting for the AP. This displays the runtime management VLAN ID setting on the AP. VLAN Conflict displays if the AP's management VLAN ID does not match the Mgnt. VLAN ID(AC). This field displays n/a if the UAG cannot get VLAN information from the AP. This field displays the AP's description, which you can configure by selecting the AP's entry and clicking the Edit button. UAG Series User's Guide 138