ZyXEL UAG4100 User Guide - Page 426
Table 193, Label, Description
View all ZyXEL UAG4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 426 highlights
Chapter 36 AP Profile Table 193 Configuration > Object > AP Profile > SSID > Security Profile > Add/Edit Security Profile LABEL Radius Server Type Primary / Secondary Radius Server Activate Radius Server IP Address Radius Server Port Radius Server Secret MAC Authentication DESCRIPTION Select Internal to use the UAG's internal authentication database, or External to use an external RADIUS server for authentication. Select this to have the UAG use the specified RADIUS server. Enter the IP address of the RADIUS server to be used for authentication. Enter the port number of the RADIUS server to be used for authentication. Enter the shared secret password of the RADIUS server to be used for authentication. Select this to use an external server or the UAG's local database to authenticate wireless clients by their MAC addresses. Users cannot get an IP address if the MAC authentication fails. Auth. Method An external server can use the wireless client's account (username/password) or Calling Station ID for MAC authentication. Configure the ones the external server uses. This field is available only when you set the RADIUS server type to Internal. Delimiter (Account) Case (Account) Delimiter (Calling Station ID) Case (Calling Station ID) 802.1X Auth. Method Select an authentication method if you have created any in the Configuration > Object > Auth. Method screen. Select the separator the external server uses for the two-character pairs within account MAC addresses. Select the case (upper or lower) the external server requires for letters in the account MAC addresses. RADIUS servers can require the MAC address in the Calling Station ID RADIUS attribute. Select the separator the external server uses for the pairs in calling station MAC addresses. Select the case (upper or lower) the external server requires for letters in the calling station MAC addresses. Select this to enable 802.1x secure authentication. This field is available only when you set the RADIUS server type to Internal. Select an authentication method if you have created any in the Configuration > Object > Auth. Method screen. Reauthenticatio Enter the interval (in seconds) between authentication requests. Enter a 0 for unlimited n Timer requests. The following fields are available if you set Security Mode to wep. Idle Timeout Enter the idle interval (in seconds) that a client can be idle before authentication is discontinued. Authentication Type Select a WEP authentication method. Choices are Open or Share key. UAG Series User's Guide 426