ZyXEL UAG4100 User Guide - Page 68
Quick Setup Interface Wizard: Summary
View all ZyXEL UAG4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Chapter 5 Quick Setup Wizards Table 12 WAN and ISP Connection Settings (continued) LABEL Password Retype to Confirm Nailed-Up Idle Timeout PPTP Configuration Base Interface Base IP Address IP Subnet Mask Gateway IP Address Server IP Connection ID DESCRIPTION Type the password associated with the user name above. Use up to 64 ASCII characters except the [] and ?. This field can be blank. Type your password again for confirmation. Select Nailed-Up if you do not want the connection to time out. Type the time in seconds that elapses before the router automatically disconnects from the PPPoE server. 0 means no timeout. This section only appears if the interface uses a PPPoE or PPTP Internet connection. This displays the identity of the Ethernet interface you configure to connect with a modem or router. Type the (static) IP address assigned to you by your ISP. Type the subnet mask assigned to you by your ISP (if given). This field only displays for an interface with a static IP address. Enter the IP address of the gateway device. Type the IP address of the PPTP server. Enter the connection ID or connection name in this field. It must follow the "c:id" and "n:name" format. For example, C:12 or N:My ISP. This field is optional and depends on the requirements of your DSL modem. IP Address Assignment WAN Interface Zone IP Address Gateway IP Address First DNS Server Second DNS Server You can use alphanumeric and -_: characters, and it can be up to 31 characters long. This displays the identity of the interface you configure to connect with your ISP. This field displays to which security zone this interface and Internet connection will belong. This field is read-only when the WAN interface uses a dynamic IP address. If your WAN interface uses a static IP address, enter it in this field. This field only displays for an interface with a static IP address. Enter the gateway's IP address. These fields only display for an interface with a static IP address. Enter the DNS server IP address(es) in the field(s) to the right. Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do not configure a DNS server, you must know the IP address of a machine in order to access it. Back Next DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice versa. The DNS server is extremely important because without it, you must know the IP address of a computer before you can access it. The UAG uses a system DNS server (in the order you specify here) to resolve domain names for DDNS and the time server. Click Back to return to the previous screen. Click Next to continue. 5.2.5 Quick Setup Interface Wizard: Summary This screen displays the WAN interface's settings. UAG Series User's Guide 68