ZyXEL UAG4100 User Guide - Page 140
Port Setting Edit
View all ZyXEL UAG4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Chapter 9 Wireless Table 55 Configuration > Wireless > AP Management > Edit AP List (continued) LABEL DESCRIPTION Radio 1/2 OP Mode Select the operating mode for radio 1 or radio 2. AP Mode means the AP can receive connections from wireless clients and pass their data traffic through to the UAG to be managed (or subsequently passed on to an upstream gateway for managing). MON Mode means the AP monitors the broadcast area for other APs, then passes their information on to the UAG where it can be determined if those APs are friendly or rogue. If an AP is set to this mode it cannot receive connections from wireless clients. Radio 1/2 Profile VLAN Settings Force Overwrite VLAN Config Management VLAN ID As Native VLAN Port Setting # Status Port PVID VLAN Configuration # Status Name VID Member OK Cancel Note: Ensure you restart the managed AP after you change its operating mode. Select an AP profile or a monitor profile from the list. If no profile exists, you can create a new one through the Create new Object menu. This section is not available when you are editing the local AP's settings. Select this to have the UAG change the AP's management VLAN to match the configuration in this screen. Enter a VLAN ID for this AP. Select this option to treat this VLAN ID as a VLAN created on the UAG and not one assigned to it from outside the network. This is the port's index number in this list. This displays whether or not the port is activated. This shows the name of the physical Ethernet port on the managed AP. This shows the port's PVID. A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a port so that the frames are forwarded to the VLAN group that the tag defines. This is the VLAN's index number in this list. This displays whether or not the VLAN is activated. This shows the name of the VLAN. This shows the VLAN ID number. This field displays the Ethernet port(s) that is a member of this VLAN. Click OK to save your changes back to the UAG. Click Cancel to close the window with changes unsaved. 9.3.2 Port Setting Edit Use this screen to enable or disable a port on the managed AP and configure the port's PVID. To access this screen, select a port and click the Edit button in the Port Setting table of the Configuration > Wireless > AP Management > Edit AP List screen. UAG Series User's Guide 140