ZyXEL UAG4100 User Guide - Page 230

Chapter 15 VPN 1-1 Mapping The following table describes the labels in this screen. Table 100 Configuration > Network > VPN 1-1 Mapping > Profile LABEL Add DESCRIPTION Click this to add an entry to the table. If you click Add without selecting an entry in advance then the new entry appears as the first entry. Edit Double-click an entry or select it and click Edit to be able to modify the entry's settings. Remove To remove an entry, select it and click Remove. The UAG confirms you want to remove it before doing so. Object Reference Select an entry and click Object Reference to open a screen that shows which settings use the entry. See Section 10.3.2 on page 165 for an example. # This field is a sequential value, and it is not associated with a specific entry. Name This field displays a descriptive name for the profile. Enter a descriptive name to identify the profile. Address This field displays the name of the IP address object the profile is set to use. Select an address object that presents the IP address(es), which can be assigned to the matched users by the UAG. Note: You cannot select an address group object at the time of writing. Interface Apply Reset Note: It's recommended that the IP addresses of the selected address object and the WAN interface are in the same subnet so that the UAG can receive response packets from the remote node. This field displays the name of the interface the profile is set to use. Select the interface through which the UAG sends traffic from the matched users. Click this button to save your changes to the UAG. Click this button to return the screen to its last-saved settings. UAG Series User's Guide 230