ZyXEL UAG4100 User Guide - Page 282

Chapter 23 Web Authentication Figure 199 Configuration > Web Authentication > Walled Garden: Domain/IP Base: Add/Edit The following table describes the labels in this screen. Table 124 Configuration > Web Authentication > Walled Garden: Domain/IP Base: Add/Edit LABEL Enable Name DESCRIPTION Select this to activate the entry. Enter a descriptive name for the walled garden link. Type Domain Name / IP Address You can use up to 31 alphanumeric characters (A-Z, a-z, 0-9) and underscores (_). Spaces are also allowed. The first character must be a letter. Select whether you want to create the link by entering a domain name or an IP address. If you select Domain, type a Fully-Qualified Domain Name (FQDN) of a web site. An FQDN starts with a host name and continues all the way up to the top-level domain name. For example, www.zyxel.com.tw is a fully qualified domain name, where "www" is the host, "zyxel" is the third-level domain, "com" is the second-level domain, and "tw" is the top level domain. Underscores are not allowed. Use "*." as a prefix in the FQDN for a wildcard domain name (for example, *.example.com). OK Cancel If you select IP, enter the IP address and subnet mask of the web site. Click OK to save your changes back to the UAG. Click Cancel to exit this screen without saving. 23.3.4 Walled Garden Login Example The following figure shows the user login screen with two walled garden links. The links are named WalledGardenLink1 through 2 for demonstration purposes. UAG Series User's Guide 282